TankJet 75H-2

Minor Versionm

by Geoff Tanner

TankJet 75H-2 (Cloud Sellers Hygienic 2)

Written By: Daniel Weeks (and 2 other contributors)
  • Comments: 0
  • Favorites: 0
  • Completions: 1

Difficulty

Moderate

Steps

12

Time Required

00:15:00 - 00:25:00

Sections

1

Flags

0

Introduction

This guide will show you how to assemble a TankJet 75H-2 (Cloud Sellers Hygienic 2) tank cleaning machine.

  1. Gather all components needed to assemble the Hygienic 2.

    • Gather all components needed to assemble the Hygienic 2.

    • Click here to see an exploded view and parts list of the Hygienic 2.

    • Slide Horizontal Shaft 75-1844S through Nozzle Carrier Assembly.

    • Use 5/32" Hex Bit to Finger tighten Horizontal Shaft 75-1844S to Elbow 75-1859S.

    • Apply anti-seize to threads.

    • Place Elbow 75-1859S in a soft jawed vice and torque Horizontal Shaft 75-1844S to 20 in-lbs.

    • Install Roll Pin 75-1856 into one of the holes at lower end of Body 75-1853S.

    • Use the 1-1/8" deep socket to Install Vertical Shaft 75-1854 to Elbow 75-1859S. Torque to 20 ft-lbs.

    • Install Rotor 75-1801-SS to Vertical Shaft 75-1854 using a flat wrench.

    • Apply anti-seize to rotor.

    • Tighten snugly.

    • Seat Motor 75-1857 inside body.

    • Install O-ring to Inlet Cap 75-1403S

    • Install Inlet Cap to Body 75-1853S

    • Apply anti-seize to OD thread of inlet cap.

    • Use Molykote 111 or equivalent product to lubricate O-ring.

    • Clamp onto flats of Body 75-1853S and tighten Inlet Cap 75-1403S to 60 ft-lbs.

    • Do not use excessive force when clamping.

    • Install Nozzles 75-1849 and tighten to 15 ft lbs.

    • The Hygienic 2 is complete.

Finish Line

One other person completed this guide.

Author

with 2 other contributors

Daniel Weeks

Member since: 07/27/2016

4,153 Reputation

7 Guides authored