Orbi-G3

Click on the link to see an exploded view of the Orbi-G3 parts list. Orbi-G3 Parts List

Install (2) 75-1846 Bushings onto Geared Nozzle Carrier 75-1851 .

Install (2) 75-1847 Retaining Rings to Geared Nozzle Body 75-1851 .

Install Roll Pin 75-1856 into Outer Body 75-1853 .

Install Bevel Gear 75-1852 to Outer Body 75-185.

Install Retaining Ring 75-1855 onto Outer Body 75-1853 until it snaps into the retaining groove.

Install Elbow 75-1859 to Nozzle Carrier Assembly. Install Shaft Cap 75-1844. Tighten to 20in-lbs.

Install nozzles 75-1849 to Nozzle Carrier Assembly and tighten to 15ft-lbs.

Apply anti-seize to all threads.

Install Washer 75-1863-G and Bushing 75-1408 to Vertical Shaft 75-1854 .

Seat Vertical Shaft 75-1854 onto Outer Body.

Using a 1-1/8" Deep Socket, Install Vertical Shaft 75-1854 to Elbow 75-1859 .

Torque the Vertical Shaft to 20ft-lbs.

Apply anti-seize to all threads.

Thread 6 Tooth Rotor 75-1801-SS to Vertical Shaft 75-1854. Snugly tighten using a flat wrench.

Apply anti-seize to all threads.

Seat Motor 75-1857 inside Body.

Install Inlet Cap 75-1403 to Outer Body.

Apply anti-seize to all threads.

Use a vice to clamp onto the flats of the outer body and torque the Inlet Cap 75-1403 to 60Ft-Lbs Max.

Do not use excessive force to clamp the outer body.

All Orbi-G3s are shipped with a set of bypass plugs, allowing you to adjust the rotational speed of the unit.