Hygienic 80

Gather all components. Click here for exploded view and parts list.

Install Washer 80-119 to Nozzle Body 40-117.

Install Horizontal Shaft 40-113 against Washer 80-119.

Sandwich Washer 80-116 between (2) Washers J6-238 and install to Horizontal Shaft 40-113.

Install Gear 80-114 to Nozzle Body 40-117.

Torque gear to 80 Ft-lbs.

Apply anti-seize to all threads.

Sandwich Washer 80-116 between (2) Washers 80-119 and install to Tooth Gear 80-111.

Install Outer Body 40-107 to Gear 80-111.

Torque gear to 80 Ft-lbs.

Apply anti-seize to all threads.

Install Vertical Shaft 40-102 to Elbow 40-112.

Snugly tighten Vertical Shaft 40-102.

Install Set Screw 74-324 to Vertical Shaft 40-102.

Install ant-sieze to all threads.

Place a soft material bar (brass/aluminum) through Nozzle Body 40-117 and Horizontal Shaft 40-113 .

Install Horizontal Shaft 40-113 to Elbow 40-112.

Apply anti-seize to all threads.

Install Outer Body 40-107 to Vertical Shaft 40-102.

Gently spin body to confirm gears are properly meshed.

Install Impeller 80-109-SS.

Apply anti-seize to all threads.

Install Inlet Disc 40-106 inside Outer Body 40-107 with bearing recesses facing up.

Install (2) Washers J6-239 and (1) Washer 80-105 to Inlet Disc 80-106.

Sandwich White Washer 80-105 between yellow Washers J6-239.

Install Vertical Shaft Cap 80-104 to Vertical Shaft 40-102 until finger tight.

Install Split Lock Washer 20-14-1 and Nut 15-23-1 to Vertical Shaft 40-102. Torque Nut 15-23-1 to 20 Ft-lbs.

DO NOT over tighten Nut 15-23-1.

Apply anti-seize to all threads.

Secure Outer Body 40-107 in a soft jaw vice and install Inlet Cap 40-101.

Torque the Inlet Cap 40-101 to 60 Ft-lbs.

Apply anti-seize to all threads.

Install Nozzle J6-115 to Nozzle Extension 80-123. Torque to 60 Ft-lbs.

Install nozzle assemblies to Nozzle Body 40-117. Torque to 60 Ft-lbs.

Install Set Screw 74-324 to bottom of Elbow 40-112.

Apply anti-seize to all threads.

Machine is now complete